Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Drive unit |
(2) | Fixed routing base |
(3) | Knurled screw for routing base |
(4) | Knurled screw for parallel guide/pilot/dust extraction adapter for routing edges |
(5) | Router bitA) |
(6) | Cap nut with collet |
(7) | Collet |
(8) | Spindle lock button |
(9) | Guide plate |
(10) | Base plate |
(11) | Dust extraction adapter |
(12) | Wing bolt for routing base |
(13) | On/off switch |
(14) | Rechargeable batteryA) |
(15) | Battery release buttonA) |
(16) | Speed preselection thumbwheel |
(17) | Handle (insulated gripping surface) |
(18) | Worklight |
(19) | Scale for setting the routing depth |
(20) | Tool holder |
(21) | Open-ended spanner (13 mm, 17 mm) |
(22) | Guide bushingA) |
(23) | Parallel guide |
(24) | Wing bolt for parallel guide |
(25) | GuideA) |
(26) | Wing bolt for fixing the horizontal alignmentA) |
(27) | Wing bolt for horizontal alignment of the guideA) |
(28) | Guide rollerA) |
(29) | Dust extraction adapterA) |
(30) | Dust extraction adapter for routing edgesA) |
(31) | Extraction hoseA) |
- A)
This accessory is not part of the standard scope of delivery.